166-2031-9101
1. The transmission cam of the equipment is an integral one-time molding, replacing the split cam, which realizes seamless installation and smooth operation to ensure the service life of the bearing.
2. Electrical parts, touch screen, inverter, PLC, thermal relay adopt Siemens, and intermediate relay adopts Omron. The electrical appliances ensure the stability of the equipment.
3. The whole equipment seal is changed from single-layer seal to double-layer, and some parts reach three-layer, which greatly guarantees the service life of the bearing.
4. In order to solve the phenomenon of large differences in measurement caused by serious powder leakage in the production of granules, the traditional processing technology ideas are changed, and the requirements for the clearance between processing and assembly are improved. Filling, the holes and holes correspond to each other during the movement of the metering disc, thus solving the gap filling method of the original NJP-2 generation model.
5. In order to ensure the lubricity of the modified equipment and the service life of the accessories, and to change the traditional oil gun type refueling method, an automatic oil pump is added to the equipment, and the refueling time and interval time are input through the touch screen. The copper tube layout allows each cam and gear to be accurately positioned for real-time refueling and lubrication.
Model: NJP-3-800C
Output: 48000 grains/h
Machine weight: 900Kg
Machine volume: 840×960×1800mm
Power supply: 380V/220V 50Hz
Number of holes: 6
Motor power: motor 1.5kw vacuum 1.1kw vacuum 2.2kw
Vacuum: 20m³/h-0.04-0.08Mpa
Vacuuming: 17.6Kpa 180m³/h
Noise: <80DB (A)
The probability of empty capsules is not less than 99.9%, the probability of filling is not less than 99.8%, and the rate of finished products is not less than 99.5%
Adaptation Capsules:: 00, 0, 1, 2, 3, 4, 5#
Quantity difference: ±3%-±4%
WeChatTELrecord number:粤ICP备2022051519号
